What Type Oil Filter Do I Need For Craftsman Lawn Tractor Model 917.28852?

What oil filter does a Craftsman riding mower use?

CRAFTSMAN Oil Filter: Briggs: OE # 492932.

Can I use a car oil filter on my lawn mower?

Just about any Quality filter is going to be fine.. You can look up the cross reference tables You will find that an auto filter will work fine, usually much better, (larger size filter media pack) and will cost a LOT less

Does a craftsman lt1000 have an oil filter?

It is possible the engine does not have an oil filter. You are correct that the filter is usually easy to see and access. You should not have to take the engine apart to replace the oil filter. The best way to see if the engine uses an oil filter is to get the engine model number and go to www.sears.com.

What’s the difference between 492932 and 492932S?

492932 VS 492932S: The only difference is the base to top dimension. S= short for equipment that is tight on clearances. The “s” at the end means short. The other filter is longer.

You might be interested:  Question: How To Hook Up A Fimco 25 Gallon Ayv To Tractor?

Are all Briggs and Stratton oil filters the same?

Answer: Yes it will Briggs and Stratton only makes one oil filter.

How often should you change lawn mower oil?

Taking proper care of your lawn mower will help your machine run well for years to come. One overlooked aspect in lawn mower maintenance is how frequent oil changes should take place. Engine oil and oil filters should be replaced at least once every spring or summer, or every 50 hours of use – whichever comes first.

Where do I put oil in my Craftsman lawn mower?

Raise the mower to its upright position. Unscrew the dipstick cap totally and pour 18 to 20 ounces of lawn mower oil into the oil reservoir. Let it settle for 5 minutes then use the dipstick to check if the oil level reaches the full capacity.

Are all riding lawn mower oil filters the same?

All mower engine oil filters use the same mesh size. All mower engine oil filters have a bypass valve set to almost the same pressure.

Will a Kohler oil filter work on a Briggs and Stratton?

Oil filter used in many Briggs & Stratton and Kohler engines. Replaces Briggs 491056 and Kohler 52-050-02. Will also replace Briggs 492932 unless there is a clearance problem. 492932 is about 3/4″ shorter but clearance is rarely an issue in lawn tractor usage.

How much oil goes in a craftsman LT1000?

Generally speaking you will need to use the oil fill cap/dipstick to gauge the oil level. It could take up to 48 ounces of oil if you did NOT replace the filter or up to 56 ounces if you DID replace the oil filter.

You might be interested:  Question: How To Pull Up Weeds Behind A Tractor?

What kind of oil do you put in a craftsman LT1000?

Sears recommends use of SAE 5W-30 multi-viscosity motor oil for operation at temperatures below freezing.

What type of oil does a craftsman LT1000 use?

It is a Sears Craftsman LT1000 riding mower. The engine oil recommended by Sears is 30 weight oil. In cold weather, below 40 degrees, 10W30 will work also.

Leave a Reply

Your email address will not be published. Required fields are marked *