Readers ask: What Sixe Tire Shoukd I Use On My Craftsman Lt1000 Tractor?

What size tires are on a craftsman Lt1000?

Craftsman Lt1000 Riding Mower Set or Front Wheels ( Fits Tire Size 15×6. 00-6) for sale online | eBay.

What size tire does a Craftsman riding mower?

MARASTAR’S 15×6. 00-6 air filled (pneumatic) front tire and wheel assembly is the perfect replacement for Craftsman Riding mowers with 15×6. 00-6 tires (check your existing tires sidewall).

What size drive belt does a craftsman Lt1000 take?

95.5″ is the correct size.

Can I put bigger tires on my riding mower?

Bigger tire will have more traction. Try for a 17×7. 50 if it fits that will get better traction and be a little faster, but not enough to affect torque a lot.

What are the dimensions of a craftsman LT1000?

The 42 inch deck on the LT1000 will make the same width cut on your lawn and is ideal for lawns between 1 and 1.5 acres, or 40-60,000 square feet. It provides a smooth, even cut and can be adjusted in height from 1.5 inches to 4 inches above the ground to tailor the height of your lawn.

You might be interested:  Readers ask: How Much Does A S&h Tractor Mechanic Make?

How do you size a tractor tire?

50-8, the first number 18 is the total diameter (outside height) of the tire in inches. The second number in the example 9.50 is the actual width measurement of the tire itself. The third number in the example 8 is the measurement in inches of the rim that this particular tire fits. To sum this up, a 18×8.

What do the numbers mean on lawn mower tires?

Mower tires with the two- number system identify the tire’s width and diameter. In the three- number system, the first number before the X is the tire’s diameter when inflated and not loaded, the middle number is the tire’s width and the final number is the rim width.

What size belt do I need for a 42 inch deck?

There’s no standard size for a 42 – inch -cut riding mower. Each model uses a different size belt. To give examples, some models use a drive belt that is ½ inch wide by 92 inches in length, while others use a belt ½ inch wide by 85 inches in length.

What size belt goes on a Craftsman 42 inch deck?

174883. AYP / Craftsman / Sears Deck Drive Belt fits 42 ” cut (2002-2003). Size: 5/8″ x 97″. Replaces part number 174883.

How long is a 42 deck belt?


Length: 101.5 (in.)
Width: 0.5 (in.)

Can you put a bigger deck on a riding mower?

Yes, you can fit a bigger deck to you mower, but engine power and deck size are often proportional.

Can I put bigger tires on my zero turn?

Yes. Smoother ride, less rutting with a wider tire, better traction, etc it will throw off your deck pitch BIG TIME if you are trying to upsize from a 20″ tire.

You might be interested:  Question: What Does A Clutch Pedal Do On A Lawn Tractor?

Can I put smaller tires on my lawn mower?

You can go a little taller to 22 or down a bit to 18 but the 8 is rim size so you can not change that. Changing tire size also changes how the mower will react. Smaller tire size will make spinning the tires a lot easier.

Leave a Reply

Your email address will not be published. Required fields are marked *