Readers ask: What Is The Gpm Of A Tc30 Tractor?

How many horsepower is a TC30 New Holland tractor?

What we know about the New Holland Boomer TC30 tractor is that it has a 3 cylinder Diesel Engine that produces 30 horsepower. Shown left is a picture of the New Holland TC30 tractor. The Boomer TC 30 tractor has a category 1 three point hitch and its pto is rated at 25.5 hp.

Where is the serial number on a New Holland TC30?

found at the top of the screen before you leave today.

How much does a tc30 New Holland tractor weigh?

New Holland TC30

Dimensions & Tires:
Wheelbase: 63 inches [160 cm]
Weight: 2193 lbs [ 994 kg ]
Front tire: 5.50-16


How do you read a tractor serial number?

Your serial number should lie between two of the stated numbers. Example: In this example, tractor serial number was 900 was built in 1981 because it is after the first serial number for 1981 but before the first number for 1982. The list only shows the number from the first tractor built in each year.

What is a PIN number on a tractor?

PIN stands for product identification number, not unlike a VIN, which is a federal designation. It is found on an aluminum tag riveted to the underside of the tractor roughly under the floorboard where your left would be—at least it is on my TC33D..

You might be interested:  Often asked: How To Guide To Mahindra Tractor?

How do I tell what year my New Holland skid steer is?

If it was made in the last few years you can tell by the second digit in the s/n. example: N7M450123 would be a 2007 N9M489987 would be 2009. If it has a s/n like LS180 239476 it is older than three years old. The new skids have the s/n plate on the outside of the cab near the left fender.

How do you tell the year of a tractor serial number?

Your owner’s manual contains information on how to locate all the identification numbers. The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below.

How do you read a Massey Ferguson serial number?

VIN number on right hand chassis rail. Top line: digits 1 to 9 from the VIN between 2 inverted triangles. Bottom line: digits 10 to 17 between 2 inverted triangles. Prior January 1st 2016, the serial number plate is located just below the rear inspection window, except for the MF5600, 6600, 7600 & 8600 series tractors.

What do John Deere tractor model numbers mean?

The tractor model numbers are comprised of four positions. The first number designates the family while the next three numbers represent the approximate engine horsepower. The fifth and sixth positions are represented by a letter. The second position is the tractor’s approximate engine horsepower.

Leave a Reply

Your email address will not be published. Required fields are marked *