Readers ask: How Much Antifreze Go In 16.9x 30 Tractor Tire?

How much antifreeze goes in a tractor tire?

A couple of charts indicate 10-15% antifreeze is needed for the approx 45-50 gallons of water this tire holds (which leaves a void/air in maybe a 1/5 of the tire volume).

How much fluid does it take to fill a tractor tire?

Chart is for a gallon of water weighting approx 8lbs per gallon. Water is not a typical tire fill. Methonal Alchol is a more common fill and weights 6.5lbs per gallon. Liquid Tire Ballast Chart.

TIRE SIZE	GALLONS OF WATER	ADDED WEIGHT (lbs.) PER TIRE
7.2-24	9	75
7.50-16	9	75
8.3-24	13	108
9.5-16	12	100

68

How many gallons of fluid does a tractor tire hold?

Approximately 6 gallons, based on a 75 % fill. I use a filling adapter, with the valve stem at 12:00.

What PSI should tractor tires be?

So, while a standard radial tractor tire may need 35 PSI to pull a heavy planter on the road, “by putting an IF tire on that tractor, we can reduce that inflation pressure down into the 20s,” Harris says. “It helps us use a lower inflation pressure to do the least amount of compaction into the soil.”

What is the best fluid for tractor tires?

Rim Guard Beet Juice is the optimal tire ballast for both new and antique farm tractors, front-end loaders, commercial back hoes, skid steers, all-terrain forklifts, road graders, compactors/rollers and all types of utility tractors.

Should you fill tractor tires with fluid?

Adding liquid ballast to your tractor tires can significantly improve performance in so many respects. You will increase traction and lower your tractor’s center of gravity (a plus for negotiating sloping terrain).

Can you fill your own tractor tires?

To fill the tires, you will need an air/water adapter kit. You can find them on Amazon or stores like Tractor Supply, which is where I got mine. They cost around $10.

How do I know if my tractor tires are filled?

If the tires are loaded, have the valve stem at 6 O’clock position and push in the core like you are going to check pressure. If loaded you will get liquid come out instead of air. Loaded tires are usually filled to the 10 O’clock position or about 75%. This is done so the liquid in the tires is above the wheel.

What kind of fluid goes in tractor tires?

Farmers will always be a breed of their own, but rest assured they will find the cheapest and/or most rugged way to achieve something, and tractor tire fluids are no exception. Some common materials include water, calcium chloride, antifreeze, windshield washer fluid, beet juice and polyurethane foam.

Why do you put calcium in tractor tires?

Traction can be increased by partially filling tractor tires with a calcium -water mixture. Volume, weight and minimum operating temperatures are given for various tire sizes and water- calcium mixtures. Water- calcium mixtures are pumped into the tire with the valve stem in the highest position.

What PSI should my 10 ply tires be?

You will need to run close to 50 psi for the 10 ply tires to stay safely beaded due to their very stiff carcass. The truck is optimal around 40 psi with 6 plys so I passed. My neighbor got the 10 plys from the factory and had to take them off due to the harsh ride.

How much air do I put in my lawn tractor tires?

Tire pressures are stated in Pounds per Square Inch (PSI) measure. The factory settings for residential riding mower tires are generally 10 PSI for rear tires and 14 PSI for front tires.

Can you put air in a loaded tractor tire?

As you know, water is not very compressible, so a tractor tire needs air for the cushion. The air will compress and give a little. therefore soften the ride. When you try to air up the tire, the tire should be fully on the ground.