Quick Answer: When Did Ford Start Casting 8n Behind The Starter On Tractor?

How do you date a Ford 8N tractor?

Locate the serial number imprinted on the Ford 8N tractor. The serial number is stamped into the metal of the engine, on the left side of the tractor when seated facing toward the front and is located just a few inches behind the oil filter. The serial number will begin with 8N.

How can I tell how old my Ford tractor is?

To determine this, look at the tractor production code, also known as the unit date code. The first digit of the tractor production code gives the production year. For tractors manufactured between 1965 and 1974, the digit corresponds with the last number in the year.

How do I identify my Ford 8N tractor?

Serial numbers on the 9N -2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter. The first number is the model number.

How can you tell the difference between an 8N and 9N Ford tractor?

You can also tell between an 8n and 9n Ford tractors by the positioning of the brake pedal. The 9n has the two brake pedals on opposite sides, so you have a brake pedal close to your right foot and another close to your left foot. On the other hand, the 8n has both brake pedals on the right side.

What’s an 8N Ford tractor worth?

You might find a good “clean” 8N with a fresh paint for $1800 or a fully redone one for 5k.

How much horsepower does a Ford 8N tractor have?

The 8N features a 23.22 belt horsepower with a 27.32 maximum. The tractor has 92 ft-lbs of torque, reached at 1,500 rpm.

Does Ford still make tractors?

Ford, which began making farm tractors in 1916, no longer produces any in this country, depending on output from factories in Canada, Belgium and England.

How do you tell the year of a tractor serial number?

Your owner’s manual contains information on how to locate all the identification numbers. The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below.

How many horsepower is a Ford 2N tractor?

Ford 2N

Ford 2N Power
Drawbar (claimed):	12 hp 8.9 kW
PTO (claimed):	23 hp 17.2 kW

Which is better Ford 8n or 9n?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.

What years did Ford make the 8n tractor?

The Ford 8N tractor was introduced in 1947, and 442,035 were built between then and 1952. The majority of them are still running. The 8N was the last of a series of tractors —the N-series—built by Ford starting in 1939, the first two being the 9N, made through 1942, and its successor the 2N, built through 1947.

Is a Ford 8N a good tractor?

The laws of supply and demand really work for you with an 8N tractor! With so many of these machines still in use, the price and availability of parts can’t be beat. You can have a lot of fun with a Ford 8N, too! If you are looking for an inexpensive, rugged, reliable tractor for basic chores, the 8N can’t be beat.

Does Ford 8N tractor have live PTO?

Supporting Member. One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.

What color is a Ford 8N tractor?

Pre and Post 1958. The 8N ” Gray ” has been described as “green/ gray ” or even as “tan”. The color that we use matches the original product.