Quick Answer: What Is The Gross Weight Of A Ford 9n Tractor?

Are Ford 9N Tractors good?

There has been a 9N in my family for almost 45 years and has been used for all kinds of work.It is a damn good tractor and will still be around after everybody on this list is long dead.

How much does a Ford eight in tractor weigh?

Ford 8N

Production:
Dimensions & Tires:
Wheelbase:	70 inches [177 cm]
Weight:	2410 to 2717 pounds
Front tire:	4.00-19

38 

What is the difference between a Ford 9N and 2N?

9N and 2N tractors had a 3-speed. The hydraulic 3-point arms have a halfway position between fully “up” and “down”. 9N and 2N tractors only had draft control. Both brake pedals are on the same side – 9N and 2N tractors were split.

How do I identify a Ford 9N tractor?

Serial numbers on the 9N -2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter. The first number is the model number.

Which is better Ford 8n or 9N?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.

What horsepower is a Ford 9N tractor?

Ford 9N

Ford 9N Power
Drawbar (claimed):	12.68 hp 9.5 kW
Belt (claimed):	20.29 hp 15.1 kW
Plows:	2 (14-inch)
Drawbar (tested):	16.31 hp 12.2 kW

2 

What year did Ford stop making tractors?

Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.

What is a 2N Ford tractor?

The Ford 2N was a variation on the 9N introduced due to World War II. By designating a new model, Ford was able bypass wartime restrictions on price. The 2N has some component changes due to wartime shortages. The battery and alternator were eliminated, and replaced with a magneto and hand-crank start.

What is a 2N Ford tractor worth?

The 9N and 2N used three-speed transmissions, while the 8N was equipped with a four-speed, but this doesn’t seem to hamper the value of the older tractors. Prices typically range from $1,000 to $3,000, depending on condition.

What color is a 9N Ford tractor?

All 9N tractors were painted dark grey. This tractor has a rear PTO, which could be used to drive three-point or towed implements.

How do you tell what year a 9N Ford tractor is?

The 9 was for the year, 1939, and N was Ford’s designation for tractor. The original price was $585. The best way to identify a tractor is by the serial number. Serial numbers on the 9N -2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter.

Does 8n have live PTO?

Supporting Member. One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.

How do you tell what year a tractor is?

To determine this, look at the tractor production code, also known as the unit date code. The first digit of the tractor production code gives the production year. For tractors manufactured between 1965 and 1974, the digit corresponds with the last number in the year.

How do you tell the year of a tractor serial number?

Your owner’s manual contains information on how to locate all the identification numbers. The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below.

What is the weight of a Ford 4000 tractor?

Ford 4000

Dimensions & Tires
Wheelbase:	84.5 inches 214 cm
Weight:	4,885 lbs 2215 kg
Front tire:	6.00-16
Rear tire:	12.4-38

1