Quick Answer: What Is The Biggest Lawn Tractor Tire?

Can I put bigger tires on my lawn tractor?

Bigger tire will have more traction. Try for a 17×7. 50 if it fits that will get better traction and be a little faster, but not enough to affect torque a lot.

What size are riding lawn mower tires?

Popular tires for ride -on mowers and lawn tractors include 18×9. 50-8 and 4.10/10-3.5-4.

What do lawn tractor tire sizes mean?

The numbers are displayed as 15×6. 00-6, for example. The first number before the “x” indicates the tire’s height or diameter when inflated and not under load. The middle number, that is the digits between the “x” and the “-,” indicates the tire’s width. The final number indicates the width of the rim.

What is the difference between R1 and R4 tractor tires?

These tires offer excellent traction on harder surfaces such as construction lots and are less aggressive on turf than an R1 tire. An R4 tire is more aggressive than an R3 tire, however, it is less aggressive than an R1 tire. An R4 tread depth is about 70 percent as deep as an R1 tire.

Can you put a bigger deck on a riding mower?

Yes, you can fit a bigger deck to you mower, but engine power and deck size are often proportional.

Can I put smaller tires on my lawn mower?

You can go a little taller to 22 or down a bit to 18 but the 8 is rim size so you can not change that. Changing tire size also changes how the mower will react. Smaller tire size will make spinning the tires a lot easier.

How long do riding mower tires last?

A good lawnmower tire should last at least up to 5 years, depending on the usage. The lifespan of tires depends mainly on the material, usage, and mileage. If you use your lawnmower a lot, or the terrain is hard for your tires, the life span will be shorter.

What do the 3 tire numbers mean?

B: TIRE WIDTH The three -digit number following the letter is the tire’s width (from side to side, looking at the tire head on) in millimeters. It’s the height of the sidewall measured from wheel rim to top of the tread, expressed as a percentage of tire width. In other words, it’s sidewall height divided by tire width.

What does 4.80 8 mean on a tire?

The numbers 4.80/4.00-8 read like this: 4.80″ is the tire width, 4.00″ is the tire section height (from the inside of the donut hole to the outside) and the 8″ is the wheel diameter. Finally, the numbers 4.80-8 read like this: 4.80″ is the tire width and “8 is the wheel diameter.

What does NHS stand for on lawn mower tires?

The (8) indicates the rim diameter that the tire is going to be mounted to, meaning this is an 8-inch wheel. All measurements are in inches. You may notice the letters “NHS” after the tire size. This means Non-Highway Service or in other words it is not designed to withstand highway speeds.

Does Tractor Supply sell lawn mower tires?

Mower Tires & Wheels at Tractor Supply Co.

How do you size a tractor tire?

50-8, the first number 18 is the total diameter (outside height) of the tire in inches. The second number in the example 9.50 is the actual width measurement of the tire itself. The third number in the example 8 is the measurement in inches of the rim that this particular tire fits. To sum this up, a 18×8.

What does R4 mean on tractor tires?

R4: Industrial Tire R4 tires, also known as industrial tires, are wide and durable tires designed primarily for use on hard surfaces like pavement and gravel.

What is the best small tractor for the money?

Here are five of the best sub compact tractors for sale on the market today, whether you drive them off the lot or order direct.

1. John Deere 1025R. Nothing runs like a Deere, as the old saying goes.
2. Kubota BX1880.
3. Mahindra eMax 20S HST.
4. New Holland Workmaster 25S.
5. Massey Ferguson GC1723EB.

Will R4 tires tear up grass?

It should come as no surprise to anyone that in two wheel drive, you could do most any driving around your lawn with a set of R4 tires and not tear things up. Two wheel drive R4 tires, donuts all day long. It simply doesn’t matter. You won’t rip stuff up.