Quick Answer: What Does A Ford 3000 Tractor Weigh?

How many horsepower is a Ford 3000 tractor?

Ford 3000 features a water-cooled motor and 3-cylinder OHV. The engine of this tractor is capable of producing 37 horsepower. You can get this tractor with built-in 158 cubic inches gas and 175 cubic inches diesel engine.

Are Ford 3000 tractors any good?

A 3000 is one of the best small tractors ever built by any brand or color of that era. They are absolutely bulletproof. Good parts availability – both new and used, not hard to work on. They are nimble – especially with power steering, have an excellent power to weight ratio and shucky- darn, are just fun to drive.

How much does a Ford tractor weigh?

Ford N-series tractor
Wheelbase	70 in (1,778 mm)
Length	115 in (2,921 mm)
Width	64.75 in (1,645 mm)
Curb weight	2,410 lb ( 1,093 kg )

13 

How heavy is a Ford 4000 tractor?

Ford 4000

Dimensions & Tires
Wheelbase:	84.5 inches 214 cm
Weight:	3162 to 3502 pounds
Front tire:	6.00×16
Rear tire:	13.6×28

1 

Is a Ford 4000 a good tractor?

A ford 4000 is an excellent fit for you, but all the troubles this tractor has are disturbing. I get the impression that he hasn’t taken good care of this tractor or perhaps it has been sitting for a while, maybe he’s fixing it up for sale.

What horsepower is a 5000 Ford tractor?

It has a 4 cylinder Ford diesel engine or gasoline engine that produce 69 horsepower and has two wheel drive and four wheel drive models that weigh up to 9700 pounds. View the Ford 5000 specs below. The Ford 5000 tractor has a category 1 and 2 three point hitch and a claimed pto of 53.09 hp.

Are Ford tractors any good?

In my experience they were good, reliable tractors as long as you didn’t use the dual power too much. In my opinion the dual power was about like the TA on the IH tractors. It was good when it worked but expensive to fix when it didn’t.

Does a Ford 3000 have live PTO?

It has a 3-cylinder OHV, water-cooled engine. It could be ordered with a Ford -built 158-cubic-inch gas or 175-cubic-inch diesel engine. It was rated at 130 horsepower at the PTO. Some of the available options were differential lock, power steering, Live PTO and hydraulic remote valves.

What years did they make Ford 3000 tractor?

The Ford 3000 agricultural tractor was produced yearly for the 10 years between 1965 and 1975. Ford discontinued the model in 1975, replacing it with the model 3600 agricultural tractor.

Is a Ford 8N a good tractor?

The laws of supply and demand really work for you with an 8N tractor! With so many of these machines still in use, the price and availability of parts can’t be beat. You can have a lot of fun with a Ford 8N, too! If you are looking for an inexpensive, rugged, reliable tractor for basic chores, the 8N can’t be beat.

Which is better Ford 8N or 9N?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.

What is a 2N Ford tractor worth?

The 9N and 2N used three-speed transmissions, while the 8N was equipped with a four-speed, but this doesn’t seem to hamper the value of the older tractors. Prices typically range from $1,000 to $3,000, depending on condition.

How many horse is a Ford 4000?

Ford 4000 Utility tractor is equipped with Ford diesel 3-cylinder liquid-cooled engine, which delivers 55 hp (41.0 kW) power.

What height is a Ford 4000?

Ford 4000 Dimensions

Dimensions
Wheelbase:	84.5 inches 214 cm
Length:	137 inches 347 cm
Width:	67.5 inches 171 cm
Height (steering wheel):	63 inches 160 cm

4 

How much hydraulic fluid does a Ford 4000 tractor take?

Ford 4000

Capacity
Fuel:	16 gal 60.6 L
Hydraulic system:	8.4 gal 31.8 L (transmission PTO)
	8.1 gal 30.7 L (independent PTO)