Quick Answer: How To Tell What Your Tractor 3 Point Is Rated At?

What is a Category 3 tractor?

Category 3 hitches are found on tractors of 80 hp to 225 hp and have top link pins that measure 1-1/4″ and lift arm pins of 1=7/16″. The spacing of the lift arms is about 38″. Category 3 tractors are beyond what most homesteaders will have, but if you do be aware of the the difference between the cat.

What is a Category 1 or 2 tractor?

Category 0 Hitch For tractors with up to 20 horsepower. Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower.

What is the difference between a cat 0 and Cat 1 3 point hitch?

differences, as one goes up in Category implements the fabrication us usually more robust and can handle more tractor horsepower. In your case a Category 0 implement would probably be lighter weight than a Category 1 even though both are 48″. More weighty material & heftier fabrication = $200.

What is a category one tractor?

It’s typically reserved for the smallest garden tractors that typically can have add-on three-point hitches put on to them, not stuff that typically comes as standard equipment. Category 1 is very, very common and typically you’re gonna see Category 1 on tractors under about 50 horsepower.

You might be interested:  Quick Answer: How To Install A Thermostat On A Ford 4000 Industrial Tractor?

What is a 3-point drawbar used for?

They come in real handy for skidding logs as you can lift the front of the log log up over obstacles. Also for trailer jockeying, having the hitch on the 3pt makes coupling trailers easy.

What does PTO stand for on a tractor?

The Power Take-Off (PTO) shaft is an efficient means of transferring mechanical power between farm tractors and implements.

What is the difference between a Class 1 and Class 2 3 point hitch?

The lower lift arms on a 3ph cat 1 are 26″ wide, with the top link being 18 inches above the center line, between the two lower lift arms. The lower lift pins are 7/8″ in diameter, and the top link pin is 3 /4″. The cat 1 hitch is used on tractors from 20-45 hp. A cat 2 hitch is 32″ wide.

What size is a Category 1 tractor?

What are the 3-point hitch categories?

Category Tractor Power Lift arm pin diameter
1 20-45 HP 7⁄8 in (22 mm)
2 40-100 HP 1 1 ⁄8 in (29 mm)
3 80-225 HP 1 7⁄16 in (37 mm)
4 More than 180 HP 2 in (51 mm)


What is the difference between Category 1 and Category 2?

Category 1 is for those who got ranks between 1 – 20k. They pay around 1.5 lakh per year as fees. It is the general merit list. Category 2 is for 20k to 40k rank.

What size is a Cat 1 pin?

Size categories

Category Tractor power Top link pin diameter*
Up to 20 hp (15 kW) 5⁄8 in (16 mm)
1 20 to 45 hp (15 to 34 kW) 3⁄4 in (19 mm)
2 40 to 100 hp (30 to 75 kW) 1 in (25 mm)
3 80 to 225 hp (60 to 168 kW) 11 ⁄4 in (32 mm)
You might be interested:  Readers ask: How Do You Put My Kioti Tractor In Reverse?


What size is CAT 1 3 point hitch?

Three-point hitch specifications

Category Hitch pin size
1 19 mm ( 3 ⁄4″) 22.4 mm (7⁄8″)
2 25.5 mm ( 1 “) 28.7 mm ( 1 1 ⁄8″)
3 31.75 mm ( 1 1 ⁄4″) 37.4 mm ( 1 7⁄16″)
4 45mm ( 1 3 ⁄4″) 51 mm (2″)


What is a tractor drawbar used for?

A drawbar is a piece of equipment which is used as a coupling between an engine and the load it pulls. Drawbars do not transfer the weight of the load to the engine, but rather act as a point of attachment so that a load can be hooked onto a trailer, truck, tractor, or similar type of engine.

What is a sleeve hitch for a garden tractor?

Once attached, the sleeve hitch lets you place ground engaging attachments to your garden tractor at the proper angle for convenient use. Boasting a simple one-time installation of mounting brackets to the tractor, the sleeve hitch offers super-simple removal for tractor use with other tow-behind attachments.

Leave a Reply

Your email address will not be published. Required fields are marked *