Question: What Kind Of Oil Filter For My Cub Cadet Lawen Tractor Lt2138?

What oil filter does my Cub Cadet take?

Models LT1042 and LT1045 take oil filter 25-050-25-S, while models LT1046 and LT1050 require oil filter 12-050-01-S. Though the filter is different for these models, the installation process is the same. As with all its models, Cub Cadet recommends changing the engine oil every 100 hours of use.

What oil filter does a Cub Cadet xt1 take?

Kohler 52 050 02-S Pack of 6 Pro Performance Oil Filters.

What kind of oil does a Cub Cadet Kohler engine take?

The Kohler “Winter” brand oil, 5W-20 or 5W-30 weight oil, is recommended for using your LT 1050 at temperatures 32 degrees F. or below. Kohler “Command” oil brand, or 10W-30, is recommended for operation during zero degrees F.

Can I use a car oil filter on my lawn mower?

Just about any Quality filter is going to be fine.. You can look up the cross reference tables You will find that an auto filter will work fine, usually much better, (larger size filter media pack) and will cost a LOT less

Do Cub Cadet push mowers have oil filters?

According to the Cub Cadet website, riding mowers require oil filters, while self-propelled mowers do not. Riding series Cub Cadet mowers require an oil filter replacement every 50 hours of use. Cub Cadet mowers are installed with engines of varying manufacturers.

What kind of oil does a Cub Cadet lt1045 take?

The Kohler “Winter” brand oil, 5W-20 or 5W-30 weight oil, is recommended for using your LT 1050 at temperatures 32 degrees F. or below. How much oil does a Cub Cadet lt1045 take?

Engine Oil
Oil capacity:	1.6 qts 1.5 L
Oil change:	100 h

Can I use synthetic oil in my Cub Cadet?

It is fine to use synthetic oil if the engine manufacturer’s change intervals are followed. In air cooled engines, if not changed on time, the syn. oil will lose the lubricating properties and gel up badly.

How often should I change the oil in my Cub Cadet riding mower?

Taking proper care of your lawn mower will help your machine run well for years to come. One overlooked aspect in lawn mower maintenance is how frequent oil changes should take place. Engine oil and oil filters should be replaced at least once every spring or summer, or every 50 hours of use – whichever comes first.

Who makes the engines for Cub Cadet?

Cub Cadet Branded Engines – Powermore® Engines.

Can I use 10W30 instead of SAE 30?

Yes, you can make use 10W30 engine oil instead of the SAE30 in your Lawn Mower. Older engines can use the SAE30, while the 10W30 is for modern engines. Again, the SAE30 is better for warmer temperatures while the 10W30 is suitable for varying temperature ranges and also works well in cold weather.

Is SAE 30 the same as 10W30?

SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures. The W stands for ‘Winter’. At operating temperature, there’ll likely be little difference between SAE 30 and SAE 10W30. In theory, they’re the same at high temperature, which is IIRC set at 100C.

Can I use synthetic oil in my Kohler engine?

You can use synthetic oil in your Kohler engine but you need to use standard oil, 10W-30/SAE 30 or 5W-20/5W-30, in new or rebuilt engines for the first 50 hours of use before switching to synthetic oil.

Are all riding lawn mower oil filters the same?

All mower engine oil filters use the same mesh size. All mower engine oil filters have a bypass valve set to almost the same pressure.

Will a Kohler oil filter work on a Briggs and Stratton?

Oil filter used in many Briggs & Stratton and Kohler engines. Replaces Briggs 491056 and Kohler 52-050-02. Will also replace Briggs 492932 unless there is a clearance problem. 492932 is about 3/4″ shorter but clearance is rarely an issue in lawn tractor usage.

Are all Briggs and Stratton oil filters the same?

Answer: Yes it will Briggs and Stratton only makes one oil filter.