Contents
- 1 What year did the Ford Jubilee tractor come out?
- 2 What is a 1953 Ford Jubilee tractor worth?
- 3 What is the difference between a Ford 8N and a Jubilee?
- 4 How do you tell the year of a tractor serial number?
- 5 How do I know what Ford tractor I have?
- 6 Is the Ford Jubilee a good tractor?
- 7 Does Ford still make tractors?
- 8 How much did a Ford 8n tractor cost new?
- 9 How many horsepower is a 1953 Ford Jubilee?
- 10 What does Ford NAA mean?
- 11 What is a 1948 Ford 8N tractor worth?
- 12 Which is better 8N or 9N?
- 13 Is a Ford 8N a good tractor?
- 14 What does 8N mean on a tractor?
What year did the Ford Jubilee tractor come out?
The Ford NAA “Golden Jubilee” was released as part of the 50th anniversary of Ford. The 1953 model (production began in September 1952) had a special nose badge noting the anniversary. Ford Golden Jubilee NAA.
Tractor hitch | |
---|---|
Rear Type: | I |
Rear lift: | 800 lbs 362 kg |
1
What is a 1953 Ford Jubilee tractor worth?
The preauction estimate is $5,000-$7,000 which is not unreasonable. While Golden Jubilee NAA’s aren’t difficult to find they are popular with collectors and in like-new condition can command premium prices.
What is the difference between a Ford 8N and a Jubilee?
An 8n has a significantly better power/weight ratio than a Jubilee which may be important if you are going to trailer it. It also has a more durable hydraulic system and considerably better fuel economy as someone has already mentioned.
How do you tell the year of a tractor serial number?
Your owner’s manual contains information on how to locate all the identification numbers. The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below.
How do I know what Ford tractor I have?
Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter. The first number is the model number.
Is the Ford Jubilee a good tractor?
While the Jubilee is not as full-featured as a modern tractor, it has enough bells and whistles to accomplish all sorts of chores on a small farm. These tractors are very reliable but any tractor this old will need replacement parts every now and then. This is where the Ford Jubilee really shines.
Does Ford still make tractors?
Ford, which began making farm tractors in 1916, no longer produces any in this country, depending on output from factories in Canada, Belgium and England.
How much did a Ford 8n tractor cost new?
Ford 8N
Production | |
---|---|
Manufacturer: | Ford |
Factory: | Highland Park, Michigan, USA |
Total built: | 524,000 |
Original price: | $1,404 (1952 ) |
1
How many horsepower is a 1953 Ford Jubilee?
How many horsepower is a 1953 Ford Jubilee? Capacities and Power The tested power for the drawbar of this tractor is 26.8 horsepower, and for the belt, it is 31.14 horsepower.
What does Ford NAA mean?
“The series/model designation of the 1953-’53 Golden Jubilee / NAA -series Ford tractor may actually be interpreted as “N-series(denotes tractor), A (utility) A (gas)””
What is a 1948 Ford 8N tractor worth?
I my area, a decent 8N would go for between $2500 and $3,000.
Which is better 8N or 9N?
They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.
Is a Ford 8N a good tractor?
The laws of supply and demand really work for you with an 8N tractor! With so many of these machines still in use, the price and availability of parts can’t be beat. You can have a lot of fun with a Ford 8N, too! If you are looking for an inexpensive, rugged, reliable tractor for basic chores, the 8N can’t be beat.
What does 8N mean on a tractor?
The 8N introduced position control, which is a small up/down handle under the seat on the right side–this was an improvement to the hydraulic system. Both brake pedals are on the same side – 9N and 2N tractors were split.