Often asked: How Much Is My 1940s Ford Tractor Worth?

What is a 2N Ford tractor worth?

The 9N and 2N used three-speed transmissions, while the 8N was equipped with a four-speed, but this doesn’t seem to hamper the value of the older tractors. Prices typically range from $1,000 to $3,000, depending on condition.

What is a 8 N Ford tractor worth?

To give you an idea how year of manufacture affects value, a 1939-1947 9n/2n in similar condition would have a minimum value of around $500 and an older 8N, around $1000. Very few tractors of this era have values that aproach that of the Ford N’s for two reasons: 3 point hitch and parts availability.

How much is a 1947 Ford 8N tractor worth?

A good running 8N should bring $2k depending on location.

What year is my old Ford tractor?

To determine this, look at the tractor production code, also known as the unit date code. The first digit of the tractor production code gives the production year. For tractors manufactured between 1965 and 1974, the digit corresponds with the last number in the year.

How do I know if my Ford tractor is a 2N?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N- 2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The numbers are usually not stamped very deep (or very straight).

How much horsepower does a Ford 2N tractor have?

Ford 2N

Ford 2N Power
Drawbar (claimed):	12 hp 8.9 kW
PTO (claimed):	23 hp 17.2 kW

How much is a 1948 Ford 8N worth?

I my area, a decent 8N would go for between $2500 and $3,000.

Does Ford still make tractors?

Ford, which began making farm tractors in 1916, no longer produces any in this country, depending on output from factories in Canada, Belgium and England.

Are 8N Ford Tractors good?

The Ford 8N is the standard of reliability, built to last for generations. While these tractors do require occasional maintenance, there are no significant design flaws that would make this tractor unreliable. These tractors are easy to work on.

How do you tell what year a Ford 8N tractor is?

To determine the year of a Ford 8N tractor, the serial number must be located and then compared to a list of serial numbers used by Ford for each of the years in which the tractor was manufactured. Locate the serial number imprinted on the Ford 8N tractor.

What engine is in a Ford 8N tractor?

Ford N-series tractor
Engine	4 cylinder inline
Transmission	3-speed manual (9N, 2N) 4-speed manual (8N)
Dimensions
Wheelbase	70 in (1,778 mm)

13 

What does 8N stand for?

8N Abbreviation

2	8N	Barents AirLink Business, Airline, Iata Airline Designator
1	8N	8 North

How do you tell the year of a tractor serial number?

Your owner’s manual contains information on how to locate all the identification numbers. The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below.

How do I find out what year my Ford 3000 tractor is?

The Ford 3000 model was made from 1965 thru 1974. The numbers we need to identify your tractor are stamped into the metal on a flat spot just above and behind your starter. Serial number, model number, and date of manufacture. They may be covered with dirt, paint, or rust.

How do you read a tractor serial number?

How to read a tractor serial number list: Tractor serial number lists nearly always show the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should lie between two of the stated numbers.