Often asked: How Much Dose A Ford 2n Tractor Weigh?

What is the difference between a Ford 9N and 2N?

9N and 2N tractors had a 3-speed. The hydraulic 3-point arms have a halfway position between fully “up” and “down”. 9N and 2N tractors only had draft control. Both brake pedals are on the same side – 9N and 2N tractors were split.

What is a 2N Ford tractor worth?

The 9N and 2N used three-speed transmissions, while the 8N was equipped with a four-speed, but this doesn’t seem to hamper the value of the older tractors. Prices typically range from $1,000 to $3,000, depending on condition.

How much does a Ford 2000 tractor weight?

Ford 2000

Dimensions & Tires
Wheelbase:	75.8 inches 192 cm
Weight:	3020 to 3362 pounds
Front tire:	5.50-16
Rear tire:	12.4-28

1 

How much does a red belly Ford tractor weigh?

The Ford 8N has an operational weight of 2,717 pounds and a ballasted weight of 4,043 pounds. With a 70-inch wheelbase, the 8N features an 8-foot, two-wheel-drive turn radius. The 8N has 13 inches of ground clearance while standing a total of 70 inches high, 64.75 inches wide and 115 inches long.

Which is better 8N or 9N?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.

Is a Ford 9N a good tractor?

The short answer is yes. The 9N is one awful tractor to work compared to an 8N, NAA or later. Not only do you don’t get position control and live hydraulics like on the 8N, both the clutch and left wheel brake are on the left, meaning with the clutch depressed you can only use the right brake.

How do I know if my Ford tractor is a 2N?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N- 2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The numbers are usually not stamped very deep (or very straight).

How many horsepower is a Ford 2N tractor?

Ford 2N

Ford 2N Power
Drawbar (claimed):	12 hp 8.9 kW
PTO (claimed):	23 hp 17.2 kW

What is a 1948 Ford 8N tractor worth?

I my area, a decent 8N would go for between $2500 and $3,000.

What HP is a Ford 2000 tractor?

Ford 2000

Ford 2000 Power
Engine:	36 hp 26.8 kW
PTO (claimed):	31 hp 23.1 kW
Drawbar (tested):	28.10 hp 21.0 kW
PTO (tested):	32.09 hp 23.9 kW

2 

What is the weight of a Ford 3000 tractor?

Ford 3000 Dimensions

Ford 3000 Weight
Shipping:	3,700 lbs 1678 kg
Operating:	4,185 lbs 1898 kg
Ballasted:	6,940 lbs 3147 kg

How many horsepower is a 3000 Ford tractor?

Ford 3000 features a water-cooled motor and 3-cylinder OHV. The engine of this tractor is capable of producing 37 horsepower. You can get this tractor with built-in 158 cubic inches gas and 175 cubic inches diesel engine.

Is a Ford 8N a good tractor?

The laws of supply and demand really work for you with an 8N tractor! With so many of these machines still in use, the price and availability of parts can’t be beat. You can have a lot of fun with a Ford 8N, too! If you are looking for an inexpensive, rugged, reliable tractor for basic chores, the 8N can’t be beat.

What is the difference between a 2N and a 8N Ford tractor?

The most noticeable differences between the 8N and its predecessors was the inclusion of a 4-speed transmission instead of a 3-speed in the 9N and 2N, and an increase in both PTO and drawbar horsepower. The other big change on the 8N was the addition of a ‘Position-control’ setting for the hydraulics.

How many HP is a Ford 8N?

Ford 8N

Ford 8N Power
Drawbar (claimed):	23.16 hp 17.3 kW
PTO (claimed):	27.32 hp 20.4 kW
Drawbar (tested):	21.95 hp 16.4 kW
PTO (tested):	23.24 hp 17.3 kW

2