Contents
- 1 How many HP is a Ford 9N tractor?
- 2 How much horsepower does a Ford 2N have?
- 3 What is the horsepower of a Ford 8N tractor?
- 4 How do I identify a Ford 9N tractor?
- 5 Is a Ford 9N a good tractor?
- 6 Which is better Ford 8n or 9N?
- 7 What is the difference between a Ford 9N and 2N?
- 8 What does drawbar horsepower mean?
- 9 What is a 2N Ford tractor worth?
- 10 Is the Ford 8N a good tractor?
- 11 Can a Ford 8N run a tiller?
- 12 What motor is in a Ford 8N tractor?
- 13 How do you tell what year a 9N Ford tractor is?
- 14 How do you tell what year your Ford tractor is?
- 15 How do you tell the year of a tractor serial number?
How many HP is a Ford 9N tractor?
The 9N weighed 2340 pounds and had 13 drawbar horsepower, which could pull a two-bottom plow. It was designed to be safe, quiet and easy to operate.
How much horsepower does a Ford 2N have?
Ford 2N
| Ford 2N Power: | |
| Drawbar (claimed): | 12 hp [8.9 kW] |
| PTO (claimed): | 23 hp [17.2 kW] |
| Mechanical: | |
| Chassis: | 4×2 2WD |
21
What is the horsepower of a Ford 8N tractor?
Ford 8N
| Ford 8N Power | |
|---|---|
| Drawbar (claimed): | 23.16 hp 17.3 kW |
| PTO (claimed): | 27.32 hp 20.4 kW |
| Drawbar (tested): | 21.95 hp 16.4 kW |
| PTO (tested): | 23.24 hp 17.3 kW |
2
How do I identify a Ford 9N tractor?
Serial numbers on the 9N -2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter. The first number is the model number.
Is a Ford 9N a good tractor?
The short answer is yes. The 9N is one awful tractor to work compared to an 8N, NAA or later. Not only do you don’t get position control and live hydraulics like on the 8N, both the clutch and left wheel brake are on the left, meaning with the clutch depressed you can only use the right brake.
Which is better Ford 8n or 9N?
They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.
What is the difference between a Ford 9N and 2N?
9N and 2N tractors had a 3-speed. The hydraulic 3-point arms have a halfway position between fully “up” and “down”. 9N and 2N tractors only had draft control. Both brake pedals are on the same side – 9N and 2N tractors were split.
What does drawbar horsepower mean?
— Rated Horsepower. — Drawbar Horsepower. This is the measure of the tractor engine’s pulling power that it can produce (not will produce) when mounted in the tractor.
What is a 2N Ford tractor worth?
The 9N and 2N used three-speed transmissions, while the 8N was equipped with a four-speed, but this doesn’t seem to hamper the value of the older tractors. Prices typically range from $1,000 to $3,000, depending on condition.
Is the Ford 8N a good tractor?
The Ford 8N is the standard of reliability, built to last for generations. While these tractors do require occasional maintenance, there are no significant design flaws that would make this tractor unreliable. These tractors are easy to work on.
Can a Ford 8N run a tiller?
TILLER: The ‘N’ tractor WILL NOT RUN A TILLER! Unless the tractor is equipped with a rare Howard or Everett auxiliary transmission. The ground speed is simply too fast without it. Another option if you REALLY must use a tiller with an ‘N’ would be a tiller with its own engine.
What motor is in a Ford 8N tractor?
The 8N features a four-cylinder, eight-valve engine with 120 cubic inches (ci) of displacement. The engine features 3.188 inches of bore and 3.75 inches of stroke with a 6-to-1 or 6.7-to-1 compression ratio, depending on the year. The 8N features a 23.22 belt horsepower with a 27.32 maximum.
How do you tell what year a 9N Ford tractor is?
The 9 was for the year, 1939, and N was Ford’s designation for tractor. The original price was $585. The best way to identify a tractor is by the serial number. Serial numbers on the 9N -2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter.
How do you tell what year your Ford tractor is?
To determine this, look at the tractor production code, also known as the unit date code. The first digit of the tractor production code gives the production year. For tractors manufactured between 1965 and 1974, the digit corresponds with the last number in the year.
How do you tell the year of a tractor serial number?
Your owner’s manual contains information on how to locate all the identification numbers. The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below.