FAQ: Which Is Bigger 9n Or 8n Tractor?

What is the difference between a 8N and 9N tractor?

The most noticeable differences between the 8N and its predecessors was the inclusion of a 4-speed transmission instead of a 3-speed in the 9N and 2N, and an increase in both PTO and drawbar horsepower. The other big change on the 8N was the addition of a ‘Position-control’ setting for the hydraulics.

Is a Ford 8N or 9N better?

This is the main difference between the 8n and 9n Ford tractors; and as you’d expect, the 8n has a number of improvements that make it better than the 9n. One such improvement comes in horsepower. The engines on the 8n tractors are generally a bit more powerful than those on 9n tractors.

Are Ford 9N Tractors good?

There has been a 9N in my family for almost 45 years and has been used for all kinds of work.It is a damn good tractor and will still be around after everybody on this list is long dead.

What does 8N mean on a tractor?

The 8N introduced position control, which is a small up/down handle under the seat on the right side–this was an improvement to the hydraulic system. Both brake pedals are on the same side – 9N and 2N tractors were split.

Does Ford still make tractors?

Ford, which began making farm tractors in 1916, no longer produces any in this country, depending on output from factories in Canada, Belgium and England.

How many hours are too many for a tractor?

Registered. I think that diesel engines on large tractors generally are good for 7000 to 10,000 hrs with decent care. Smaller tractors with diesels might be good for a little less, say 5k to 8k (most run at higher RPMs). And gasoline tractors good far about 6k to 8k with appropriate care.

Is a Ford 8N a good tractor?

The laws of supply and demand really work for you with an 8N tractor! With so many of these machines still in use, the price and availability of parts can’t be beat. You can have a lot of fun with a Ford 8N, too! If you are looking for an inexpensive, rugged, reliable tractor for basic chores, the 8N can’t be beat.

How many HP is a Ford 8N?

Ford 8N

Ford 8N Power
Drawbar (claimed):	23.16 hp 17.3 kW
PTO (claimed):	27.32 hp 20.4 kW
Drawbar (tested):	21.95 hp 16.4 kW
PTO (tested):	23.24 hp 17.3 kW

2 

How can you tell an 8N front 9N?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N -2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter.

What horsepower is a Ford 9n tractor?

Ford 9N

Ford 9N Power
Drawbar (claimed):	12.68 hp 9.5 kW
Belt (claimed):	20.29 hp 15.1 kW
Plows:	2 (14-inch)
Drawbar (tested):	16.31 hp 12.2 kW

2 

What year is my Ford 9n tractor?

The 9 was for the year, 1939, and N was Ford’s designation for tractor. The original price was $585. The best way to identify a tractor is by the serial number. Serial numbers on the 9N -2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter.

Does Ford 601 have live PTO?

It does have live hydro but does not have live pto. It has four forward gears..

Does 8N have live PTO?

Supporting Member. One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.

What’s an 8N Ford tractor worth?

You might find a good “clean” 8N with a fresh paint for $1800 or a fully redone one for 5k.

What year did Ford stop making tractors?

Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.