FAQ: What Tractor Uses A 404 International Engine?

How much horsepower does a 404 International tractor have?

International Harvester 404

International Harvester 404 Power:
Drawbar (claimed): 33.4 hp [24.9 kW] (gas)
29 hp [21.6 kW] (LP)
PTO (claimed): 36.7 hp [27.4 kW] (gas)
33 hp [24.6 kW] (LP)


How many horsepower is a 504 International tractor?

International 504

Model history
Engine make International
Engine model C-153
Fuel type gasoline
Power hp 58 engine, 46 pto, 41 drawbar


What was the last international tractor made?

The last IH tractor, a Model 5488, was built there on May 14, 1985. International’s Agriculture Equipment Division was sold to Tenneco the prior year, in 1984.

How much horsepower does a Farmall 400 have?

Farmall 400

Farmall 400 Power:
Drawbar (claimed): 37 hp [27.6 kW]
PTO (claimed): 45 hp [33.6 kW]
Drawbar (tested): 48.12 hp [35.9 kW]
Belt (tested): 52.36 hp [39.0 kW]


How many horsepower is a 460 International tractor?

International Harvester 460

International Harvester 460 Power
Engine: 61 hp 45.5 kW
Drawbar (claimed): 48 hp 35.8 kW
Belt (claimed): 51 hp 38.0 kW
Plows: 4
You might be interested:  How Hard Is It To Put Fwd On A 2wd Tractor?

How much horsepower does a 504 Farmall have?

Farmall 504

Farmall 504 Power:
Drawbar (tested): 40.41 hp [30.1 kW]
PTO (tested): 46.20 hp [34.5 kW]
power test details


Is International owned by Ford?

Ford does not own International. They purchased engines from International until International made such a mess of those engines that Ford sued them and dumped them. Ford used to own Volvo cars, but sold it last year. Dealers are franchisees of the parent company.

Does International Harvester still make tractors?

The letter series tractors were updated to the “super” series in 1953 (with the exception of the A, which had become a “super” in 1947, and the B and BN, which were discontinued in 1948). Many of these tractors (especially the largest, the H, M, and W models) are still in operation on farms today.

Why did IH go broke?

There were two situations that came to a head in 1984 on the ag equipment side of IH that the already much weakened IH was in a poor situation to handle, making a sale to Tenneco very attractive before either of the situations exploded and forced IH into bankruptcy.

What is the difference between a Farmall M and a Super M?

What is the difference between the Super M and a regular M? The M has a 248 cu. inch engine, the Super M has a 264 cu.

How many horsepower is a Farmall A?

The Farmall “A” and “AV” were small, “one-plow” tractors that delivered 16.3 horsepower on the drawbar and 18.3 on the belt. They were offered with either a gasoline or distillate four-cylinder engine. The “A” had 21 inches of clearance and the “AV” had almost 28 inches.

You might be interested:  Often asked: How To Build A Diesel Garden Pulling Tractor?

How many horsepower is a Farmall Super M?

Farmall Super M

Farmall Super M Power
Drawbar (tested): 44.23 hp 33.0 kW
Belt (tested): 47.07 hp 35.1 kW
power test details

Leave a Reply

Your email address will not be published. Required fields are marked *