FAQ: How Too Add Transmission Oil To Case 580c Tractor?

How much oil does a 580c case hold?

J.I. Case 580 CK Construction King Engine

Engine Oil
Oil capacity 5 qts 4.7 L
Oil change 120 h ( oil )
240 h (filter)

What is case TCH fluid?

Provides superior wear protection for hydraulic components, drive train gears and other transmission parts. Provides controlled frictional characteristics to provide smooth operation of wet brakes and clutches.

Can you use hydraulic fluid in a transmission?

Transmissions may be designed as manual or automatic, and the fluids involved are drastically different for each system type. Most automatic transmission systems use automatic transmission fluid (ATF) as a hydraulic fluid, as well as a gear lubricant.

How tall is a case 580C backhoe?

Dimensions. The Case 580 is 22 feet, 8 inches long and 7 feet, 2 inches wide, and it stands 13.9 feet tall. The wheelbase of the Case 580 is 7 feet and the ground clearance is 1.2 feet.

What does a 580C case weigh?

Ballpark for a 580C is 15,000 lbs.

What is Hy-Tran oil?

Hy – Tran ® Premium Hydraulic Transmission Oil #73344265 is bench tested, field tested and approved by CNH Industrial engineers to keep tractor transmissions, axles and hydraulic systems free of deposits while inhibiting wear, corrosion, sludge and foaming. Hy – Tran ® Premium has the best water tolerance of any oil tested.

You might be interested:  Quick Answer: How To Replace A Clutch On A Ford 335 Tractor?

What is c3 transmission fluid?

Description: Conoco Hydraulic Transmission Fluid, Type C-3 is a heavy-duty, low viscosity fluid for mobile hydraulic systems, torque converters and automatic transmissions. Use it in Allison powershift transmissions and other transmissions that require an Allison C-3, C-2 or C-1 fluid.

What viscosity is Hytrans?

A quick Web search indicates that the viscosity of Hy-Tran is equivalent to SAE 10W30. In addition to any application calling for hydraulic fluid I”d use it in any none-high-temperature application calling for SAE 30 oil.

What’s the difference between hydraulic fluid and transmission oil?

Transmission oil is a type of hydraulic oil! It a medium that transmits power from the engine to the transmission. Meanwhile, other types of hydraulic fluid includes multigrade engine oil, conventional and antiwear hydraulic oil.

What is the difference between automatic transmission fluid and hydraulic fluid?

Hydraulic oil is generally classified by its specific function within a machine system. But in general, it will be used to dissipate heat, avoid corrosion, lubricate cylinders, valves, and pumps, and to transfer hydraulic energy. On the other hand, automatic transmission fluid is a type of oil.

Is there a difference between hydraulic oil and hydraulic fluid?

Hydraulic oil and hydraulic fluid are terms that are sometimes used interchangeably, but they are not necessarily the same. While hydraulic oil is a fluid, hydraulic fluid can also consist of other fluids, including plain water, water- oil emulsions and salt solutions.

What is the height of a backhoe?


Max length with std. Stick, mm (ft/in) 7430 (24 ft 5 in)
Height over ext Stick, mm (ft/in) 3910 (12 ft 10 in)
Maximum Width, mm (ft/in) 2350 (7 ft 9 in)
Width over tires, mm (ft/in) 2340 (7 ft 8 in)
Wheelbase – 4WD, mm (ft/in) 2190 ( 7 ft 2 in )
You might be interested:  Quick Answer: What Is Estimate Cost To Haul Tractor?

What engine is in a case 580C?

The J.I. Case 580C Construction King is equipped with a 3.4 L (207.0 cu·in) four-cylinder diesel engine and one of two transmissions: a mechanical shuttle transmission with 8 forward and 8 reverse gears and with dry disc clutch or a power shuttle transmission with 4 forward and 4 reverse gears.

What motor is in a case 580C?

J.I. Case 580C Engine

Engine Detail
J.I. Case G207D
Displacement 207 ci 3.4 L
Power (gross) 57 hp (8-speed) 42.5 kW

Leave a Reply

Your email address will not be published. Required fields are marked *