Contents
- 1 How do I identify my old tractor?
- 2 How do I tell what year my Ferguson tractor is?
- 3 How do I identify my Ferguson tractor?
- 4 How do you read a Massey Ferguson serial number?
- 5 How do you tell the year of a tractor serial number?
- 6 Does Ford still make tractors?
- 7 How do you date a GREY Ferguson?
- 8 What year is Massey Ferguson 135?
- 9 What Colour are Ferguson tractors?
- 10 What engine does Massey Ferguson use?
- 11 How heavy is a GREY Fergie?
- 12 How many Ferguson tractors were made?
- 13 How do I decode a John Deere serial number?
- 14 What do the numbers on tractors mean?
- 15 What is the difference between a Massey Ferguson 35 and a 35x?
How do I identify my old tractor?
The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The numbers are usually not stamped very deep (or very straight).
How do I tell what year my Ferguson tractor is?
To identify your tractor model and year of manufacture check the engine serial number (SN) plates. The SN plate is located at varying positions on the instrument console, depending on the model.
How do I identify my Ferguson tractor?
Locate the serial number by checking the lower left-hand side and lower right-hand side of the steering wheel panel. In addition, certain older Ferguson tractors have the serial number stamped to a plate mounted to one of these areas of the steering wheel panel.
How do you read a Massey Ferguson serial number?
VIN number on right hand chassis rail. Top line: digits 1 to 9 from the VIN between 2 inverted triangles. Bottom line: digits 10 to 17 between 2 inverted triangles. Prior January 1st 2016, the serial number plate is located just below the rear inspection window, except for the MF5600, 6600, 7600 & 8600 series tractors.
How do you tell the year of a tractor serial number?
Your serial number should lie between two of the stated numbers. Example: In this example, tractor serial number was 900 was built in 1981 because it is after the first serial number for 1981 but before the first number for 1982. The list only shows the number from the first tractor built in each year.
Does Ford still make tractors?
Ford, which began making farm tractors in 1916, no longer produces any in this country, depending on output from factories in Canada, Belgium and England.
How do you date a GREY Ferguson?
The serial plate should be on the bottom of the dash board to the right on this range of tractors. There is a date code in front of the transmission housing dip stick (response lever on 135) and again in front of the steering drop arm.
What year is Massey Ferguson 135?
The Massey Ferguson 135 was produced from 1964 to 1975 and was a successor to the Massey Ferguson 35. To identify your serial number look on the instrument panel below the steering column.
What Colour are Ferguson tractors?
A truly classic colour used on Massey Ferguson tractors from the 1950’s. Paintman Paint Massey Ferguson Tractor Red is a traditional synthetic coach enamel.
What engine does Massey Ferguson use?
All are equipped with the latest AGCO POWER, Tier II, 6.6 litre engine.
How heavy is a GREY Fergie?
Ferguson TE-20
| Production: | |
|---|---|
| Dimensions & Tires: | |
| Wheelbase: | 70 inches [177 cm] |
| Weight: | 2,760 lbs [1251 kg] |
| Front tire: | 6.00-16 |
28
How many Ferguson tractors were made?
Ferguson and Coventry tractor production That resulted in Standard signing a 10-year lease for the Banner Lane plant. At the height of production back then over 6,000 people were employed and over a ten-year period more than 500,000 Ferguson TE tractors were produced at Banner Lane.
How do I decode a John Deere serial number?
Identify the next four letters and numbers after the factory code, which will be positions three to six in a 13-symbol VIN, or positions four to seven in a 17-symbol VIN. This is the model number. For instance, in the John Deere VIN CD6068G123456, 6068 is the model number.
What do the numbers on tractors mean?
The tractor model numbers are comprised of four positions. The first number designates the family while the next three numbers represent the approximate engine horsepower. The fifth and sixth positions are represented by a letter. The second position is the tractor’s approximate engine horsepower.
What is the difference between a Massey Ferguson 35 and a 35x?
The 35 and 35x were the same tractors except for the engines, both being indirect injection but the 35x operating at higher revs and with more HP and torque. Both had option of difflocks after serial No 283320, but only 35x had option of multipower which came as standard with diff lock.